Comparison of the drying by the difference in steam pressure / sludge drying, slurry drying, recycling drying

Food processing plant sludge drying
Comparison of the drying by the difference in steam pressure

Drying in steam pressure 0.5Mpa

Drying in steam pressure 0.7Mpa

• Material to be dry: Food processing plant sludge
• Purpose of drying: Compost from waste products
• Moisture content: 85.2％W.B. before drying,  5.4％W.B. after drying (0.7Mpa)
• Requirements for dryer: No clogging inside of the dryer since materials being dried are adhesive. 24-hour unattended operation. No change in components of the dried materials after drying because of the purpose for compost.
• Test result: OK

Temperature is adjusted to the desired level by changing pressure.
Heat source:Low-pressure steam
Temperature of the dryer can be adjusted to the desired level by changing steam pressure.

Company’s site : https://kenki-corporation.com