With technologies based on 11 patents in 8 countries, KENKI DRYER can dry sticky and adhesive materials that no other dryers can deal with. It can dry any materials easily with simple operation and low cost.
While the main purposes of drying are countermeasures for rising price of industrial waste disposal cost, reduction of amount and cost of industrial waste disposal, and reduction of CO2, they can be achieved efficiently and with no operator by AI and IoT technologies. A company can increase its profit together with its environmental contribution as the results.
|Current status of sites where the machines were installed.|
At the sites where the machines are installed, not a few parts rely on experiences and intuitions of skilled workers.
Also, it is difficult to increase number of worker at factories because of their 3D (dirty, dangerous and demeaning) working environment and also an aging population with declining birthrate.
In most of the cases, not a dedicated staff handle the operation of the machine but a staff does it together with other tasks in parallel.
Moreover, these tasks are often done at factory’s offices which are not at the site where the machines were installed.
Most of materials that KENKI DRYER takes care of are ones which is difficult to dry with other dryers.
Also, change in properties of materials or change in fed amount and moisture contents often happens during actual operation.
On top of that, what is required of KENKI DRYER is to keep moisture contents constant after drying.
To keep moisture contents constant after drying, residence time inside the dryer need to be controlled by adjusting rotation speed of KENKI DRYER’s main body shaft manually according to the types of the materials.
KENKI DRYER’s AI makes the adjustment automatically instead of manual operation by someone being there.
KENKI DRYER’s AI is a crewless control technology which keeps moisture contents of materials after being dried constant.
If moisture contents after drying is constant, processes after the drying can be done smoothly.
Also, quality of the dried materials is stable, therefore, they can be sold with high price and are easy to be handled.
By our unique AI technology, time to work on the KENKI DRYER become significantly less and you can use the time for other tasks.
|Remote control with IoT of KENKI DRYER|
The remote control with IoT of KENKI DRYER is touch panel type and makes operation handling easy.
By the remote control with IoT of KENKI DRYER, operation of KENKI DRYER can be handled in factory office etc. by doing other tasks without going to the local site.
With easy operation of the remote control with IoT of KENKI DRYER, no additional labor cost happens since there is no need to hire skilled workers.
Since work at local sites become less and there is no direct contact with other staff, infectious disease can be prevented.
|KENKI DRYER’s Scope of AI・IoT|
KENKI DRYER’s AI and IoT can automate operation not only for KENKI DRYER but also other apparatuses.
|Alignment of AI and IoT|
In automatic control with AI, system cooperation with IoT which is for remote control is very important. KENKI DRYER’s automatic control with AI uses data accumulated by IoT to improve its accuracy.
By integrating AI programs into PLC, it can be connected to remote control programs of IoT, and the data accumulated in IoT can be used by AI.
AI (Artificial Intelligence) a term for software or system which is simulated human knowledge with computers.
IoT stand for Internet of Things and is a system to getting data from things and control the things remotely by incorporating information into things and connecting them via internet.
PLC is a device which automatically control a machine.
You must be logged in to post a comment.