Four methods of drying process
Patented in JAPAN, TAIWAN
Patent applied in CHINA, KOREA, EU, US,CANADA
Feeding and drying
This is a feeder equipment which feed materials to the main body by rotating two shafts having special shaped blades attached. Steam are supplied into the two shafts so that the shafts and the blades are continuously heated.
Agitation drying
This is the main section of this dryer. Unique blades are attached to two shafts set inside of the main body of the dryer, and the blades dry, agitate and carry materials without crushing or getting caught in. Steam are supplied into the two shafts so that the shafts and the blades are continuously heated.
Circulation drying
Air inside of the dryer is drawn in with a circulation blower and the air is blown back to the dryer after heated by heat exchangers attached on the upper part of the dryer.The air blown back is aimed at the top part of the material. To blow heated air always on the top part of the materials helps to dry the materials efficiently.
Indirect drying
A heat exchanger is attached to outside of the dryer’s trough. Steam is supplied to the heat exchanger and the side and bottom parts of the dryer are heated up continuously.
Easy moisture content adjustment
KENKI DRYER （Wood chips drying）
As residence time of materials inside of the dryer can be adjusted by changing rotation speed of shafts, moisture content can also be adjusted.
You must be logged in to post a comment.