We will exhibit at water technology trade show. Our exhibition is settled with short notice and ETIA will manage it this time. Exhibition Name: Aquatech Amsterdam 2017 Date: October 31 – November 03, 2017 Place: Amsterdam, Netherlands Booth: Swissenviro GmbH / 07.245 Exhibition Items: KENKI DRYER, Biogreen Site: https://www.aquatechtrade.com/amsterdam/ A picture of the booth Company’s […]
About effects of flocculants during drying 1) What is flocculants? Flocculant is a chemical to assemble scattered particles about the cloudy water in water treatment plant etc. and to makes clusters, then the clusters are settled out of water. The cluster made by assembled particles are called aggregates or flocs. By settling down the particles, it […]
What are characteristics of drying methods of KENKI DRYER？ There are two. 1）Self-cleaning screw （Patented） 2）Four methods of drying process（Patented） 1）Self-cleaning screw Drying no other one can do. Drying of any sticky, adhesive stuff Self-cleaning screw Even materials stuck on the blades of one screw, blades of the other screw peel the materials off as […]
Drying of chemical waste / Example of drying test Material to be dry: Chemical waste Purpose of drying: Raw materials from waste products Moisture content: 60％W.B. before drying, 5％W.B. after drying Requirements for dryer: No clogging inside of the dryer since materials being dried are adhesive. 24-hour unattended operation. No change in components of the dried materials […]
Food processing plant sludge drying Comparison of the drying by the difference in steam pressure Drying in steam pressure 0.5Mpa Drying in steam pressure 0.7Mpa Material to be dry: Food processing plant sludge Purpose of drying: Compost from waste products Moisture content: 85.2％W.B. before drying, 5.4％W.B. after drying (0.7Mpa) Requirements for dryer: No clogging inside of […]