KENKI DRYER is a drying apparatus and dries objects being wet. Being wet suggests a phenomenon that liquid is contacting surface of solid body, and degree of wetness can be measured from their contact angles if we know the surface tension of solid and liquid. Then, what is surface tension? Surface tension is energy comes from […]
KENKI DRYER is a drying apparatus, and drying suggests the process to add heat to materials containing water, solvent, etc. and vaporize the liquid. It can be said that liquid in wet solid body becomes gas by getting energy. What is wetting then? Wetting is phenomenon that liquid is touching surface of solid body. Solid body will […]
Seasoning processing factory sludge drying / Test cases Material to be dry : Seasoning processing sludge Purpose of drying : Being use as fuel or fertilizer after drying Moisture content : 80％W.B. before drying, 10％W.B. after drying Requirements for dryer : Not to be clogged inside of the dryer since the material has adhesiveness. 24 […]
If you would like to check size of KENKI DRYER before doing drying test, model selection can be done by checking the amount of evaporated water from our standard specification. The amount of evaporated water suggests the difference between before and after the drying process, and it is possible to be calculated. The followings are its […]
Heat source of KENKI DRYER, which is a drying apparatus, is saturated steam. To convert the amount of steam consumed for its drying process into energy amount, “Conversion method of steam” issued by METI (Ministry of Economy, Trade and Industry) is a good reference. Specific enthalpy of steam is used for the calculation of amount of […]