Skip to the content Skip to the Navigation

KENKI DRYER

  • Home 
  • Solution 
    • Sludge drying
    • Waste drying
    • Slurry drying
    • Heat source, Steam
    • Dry test
    • Evolution
  • Products 
    • Self-cleaning screw
    • Methods
    • Products Specifications
    • Global patents
    • Dry all
    • Videos
    • Patent certificates
    • Applications
    • Brochures
  • Heat pump dryers
    • About heat pump
    • The construction of the heat pump
    • Adiabatic expansion and adiabatic compression
    • Significantly reduced of fuel cost and carbon dioxide emission
  • Wood chips dryers 
    • Characteristics
    • Agitating blades
    • Methods
    • Specifications
    • Videos
  • About us 
    • Access
    • Adoptions
    • Global
  • Contact 
  • Japanese 
  • Our sites 
    • Company’s site English
    • Pyrolyzer Biogreen Japanese
    • Company’s site Japanese

Steam

  1. HOME
  2. Steam
feeding-device sludge dryer kenki dryer 08/07/2020
08/07/2020 / Last updated : 11/07/2020 kenki Steam

Steam drain / Sludge drying, Slurry drying, Recycling drying

■ What is steam drain?   Steams used as heat source of drying process is condensed and changes its state into liquid after releasing its latent heat. At the time of changing state to liquid, it is hot water which have the same temperature as the steam. The hot water is called drain. Among heat […]

Comparison with hot air drying
26/06/2020 / Last updated : 11/07/2020 kenki Steam

Superheated steam and saturated steam / Sludge drying, Slurry drying, Recycling drying

■ What is superheated steam Temperature of water does not rise for a while after the water is boiled and starts generating saturated steam. However, the temperature starts rising at some point. Condition of saturated steam can be distinguished as “wet saturated steam” and “dry saturated steam” more specifically. When steam contains water in it […]

Temperature of the dryer can be adjusted to the desired level by changing steam pressure.
22/06/2020 / Last updated : 11/07/2020 kenki Steam

Steam pressure / Sludge drying, Slurry drying, Recycling drying

■ Steam pressure Steam is generated when water is boiled though, there is a large difference between their volume. For example, volume of steam will be 1,700 times larger than water when steam is generated without adding pressure under atmospheric pressure. Boilers for creating steam generates steam by adding heat on water within sealed container. […]

The heat capacity of the latent heat of the steam is about 2-5 times as large as that one of oil or hot water.
19/06/2020 / Last updated : 11/07/2020 kenki Steam

Latent heat, sensible heat and heat of condensation / Sludge drying, Slurry drying, Recycling drying

■  Latent heat, sensible heat   Even heat keeps being added to saturated water, water temperature will not rise and water keeps boiling. Steam generated here is called saturated steam though, heat energy which make saturated water into saturated steam is called latent heat. Latent heat depends on pressure and it becomes lower as pressure […]

difference in saturated temperature boiling point by pressure 18/06/2020
18/06/2020 / Last updated : 11/07/2020 kenki Steam

Saturation temperature (boiling point) and saturated steam pressure / Sludge drying, Slurry drying,

■  What is saturation temperature? When water in a container keeps being heated, its temperature rises and start boiling at some point, and the temperature stops rising. This water is called saturated water and the temperature is called saturation temperature or boiling point. Also, this saturation temperature depends on pressure. The pressure is called saturation […]

Posts navigation

  • Page 1
  • Page 2
  • »

Recent posts

feeding-device sludge dryer kenki dryer 08/07/2020

Steam drain / Sludge drying, Slurry drying, Recycling drying

08/07/2020
Comparison with hot air drying

Superheated steam and saturated steam / Sludge drying, Slurry drying, Recycling drying

26/06/2020
Temperature of the dryer can be adjusted to the desired level by changing steam pressure.

Steam pressure / Sludge drying, Slurry drying, Recycling drying

22/06/2020
The heat capacity of the latent heat of the steam is about 2-5 times as large as that one of oil or hot water.

Latent heat, sensible heat and heat of condensation / Sludge drying, Slurry drying, Recycling drying

19/06/2020
difference in saturated temperature boiling point by pressure 18/06/2020

Saturation temperature (boiling point) and saturated steam pressure / Sludge drying, Slurry drying,

18/06/2020
metal sludge drying test cases sludge dryer kenki dryer 15/06/2020

Metal included sludge drying / Test cases / Sludge drying, Recycling drying

15/06/2020
steam trap steam dryer sludge dryer kenki dryer 2020.6.11

Vapor, steam and flash steam / Sludge drying, Slurry drying, Waste drying

11/06/2020
raw materials drying slurry drying 2020.6.10

Raw materials slurry drying / Liquid drying / Test cases / Slurry drying

10/06/2020
hybrid type dehydrator sludge dryer kenki dryer 2020.6.8

Hybrid type dehydrator / Sludge drying, Recycling drying

08/06/2020
midgut gland of the scallop drying recycling dryer kenki dryer 05/06/2020

Drying of Midgut gland of the scallop / Test cases / Waste drying, Recycling drying

06/06/2020

Category

  • About drying
  • Dehydrator, Dewatering
  • Exhibition
  • FAQ
  • KENKI DRYER
  • Patent
  • Raw materials drying
  • Sludge drying
  • Slurry drying
  • Steam
  • Waste drying
  • Wastewater treatment
  • Wood chips drying

Archive

  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • October 2019
  • June 2019
  • September 2018
  • August 2018
  • April 2018
  • January 2018
  • November 2017
  • October 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • Sitemap
footer logo 01 png

3-9-7 KAMIMUTA, HAKATA-KU, FUKUOKA-SHI, FUKUOKA 812-0006 JAPAN
TEL:+81-92-411-1203
FAX:+81-92-411-1259

Copyright © KENKI DRYER All Rights Reserved.

PAGE TOP
MENU
  • Home 
  • Solution 
    • Sludge drying
    • Waste drying
    • Slurry drying
    • Heat source, Steam
    • Dry test
    • Evolution
  • Products 
    • Self-cleaning screw
    • Methods
    • Products Specifications
    • Global patents
    • Dry all
    • Videos
    • Patent certificates
    • Applications
    • Brochures
  • Heat pump dryers
    • About heat pump
    • The construction of the heat pump
    • Adiabatic expansion and adiabatic compression
    • Significantly reduced of fuel cost and carbon dioxide emission
  • Wood chips dryers 
    • Characteristics
    • Agitating blades
    • Methods
    • Specifications
    • Videos
  • About us 
    • Access
    • Adoptions
    • Global
  • Contact 
  • Japanese 
  • Our sites 
    • Company’s site English
    • Pyrolyzer Biogreen Japanese
    • Company’s site Japanese