Skip to the content Skip to the Navigation

KENKI DRYER

  • Home 
  • Solution 
    • Sludge drying
    • Waste drying
    • Slurry drying
    • Heat source, Steam
    • Dry test
    • Evolution
  • Products 
    • Self-cleaning screw
    • Methods
    • Products Specifications
    • Global patents
    • Dry all
    • Videos
    • Patent certificates
    • Applications
    • Brochures
  • Heat pump dryers
    • About heat pump
    • The construction of the heat pump
    • Adiabatic expansion and adiabatic compression
    • Significantly reduced of fuel cost and carbon dioxide emission
  • Wood chips dryers 
    • Characteristics
    • Agitating blades
    • Methods
    • Specifications
    • Videos
  • About us 
    • Access
    • Adoptions
    • Global
  • Contact 
  • Japanese 
  • Our sites 
    • Company’s site English
    • Pyrolyzer Biogreen Japanese
    • Company’s site Japanese

FAQ

  1. HOME
  2. FAQ
caluculation amount of evaporated water KENKI DRYER 13/8/2018
13/08/2018 / Last updated : 13/08/2018 kenki FAQ

Calculation for amount of evaporated water / Sludge drying, Slurry drying, Waste drying

If you would like to check size of KENKI DRYER before doing drying test, model selection can be done by checking the amount of evaporated water from our standard specification. The amount of evaporated water suggests the difference between before and after the drying process, and it is possible to be calculated. The followings are its […]

Exhaust air and water treatment 5.1.2018
05/01/2018 / Last updated : 05/01/2018 kenki FAQ

About exhaust air and water

Our drying machine of KENKI DRYER exhausts water vapor inside of its body with exhaust blowers during being operating. If moisture inside of the dryer is not exhausted, amount of water vapor in the dryer reaches to the amount of saturated vapor and materials to be dried get wet because of dew condensation even though […]

lump prevention mechanism SHTS technology
02/01/2018 / Last updated : 05/01/2018 kenki FAQ

What is the details about patents that KENKI DRYER has?

About the patents that KENKI DRYER has, there are mainly two kinds of patent which are SHTS technology and drying mechanism ・SHTS technology 1) Self-cleaning screws 2) To prevent forming lumps with sticky and adhesive materials – a mechanism which shears the materials being dried. ・Drying mechanism 1) Original four drying mechanisms 2) By shutting out fresh […]

drying test measurement spot 23.11.2017
23/11/2017 / Last updated : 23/11/2017 kenki FAQ

Please let me know the detailed contents of the drying test.

About the detailed contents of drying test. We perform drying test for 2 days or more with one kind to material to be dried after receiving it. Some conditions settings of normal test are chosen and tests are performed on that settings. The number of settings is two or more, and sometimes the tests are performed […]

self-cleaning screw kenki dryer 24.10.2017
24/10/2017 / Last updated : 24/10/2017 kenki FAQ

What are characteristics of drying methods of KENKI DRYER? / sludge drying, slurry drying

What are characteristics of drying methods of KENKI DRYER? There are two. 1)Self-cleaning screw (Patented) 2)Four methods of drying process(Patented)  1)Self-cleaning screw  Drying no other one can do. Drying of any sticky, adhesive stuff   Self-cleaning screw Even materials stuck on the blades of one screw, blades of the other screw peel the materials off as […]

Posts navigation

  • Page 1
  • Page 2
  • »

Recent posts

feeding-device sludge dryer kenki dryer 08/07/2020

Steam drain / Sludge drying, Slurry drying, Recycling drying

08/07/2020
Comparison with hot air drying

Superheated steam and saturated steam / Sludge drying, Slurry drying, Recycling drying

26/06/2020
Temperature of the dryer can be adjusted to the desired level by changing steam pressure.

Steam pressure / Sludge drying, Slurry drying, Recycling drying

22/06/2020
The heat capacity of the latent heat of the steam is about 2-5 times as large as that one of oil or hot water.

Latent heat, sensible heat and heat of condensation / Sludge drying, Slurry drying, Recycling drying

19/06/2020
difference in saturated temperature boiling point by pressure 18/06/2020

Saturation temperature (boiling point) and saturated steam pressure / Sludge drying, Slurry drying,

18/06/2020
metal sludge drying test cases sludge dryer kenki dryer 15/06/2020

Metal included sludge drying / Test cases / Sludge drying, Recycling drying

15/06/2020
steam trap steam dryer sludge dryer kenki dryer 2020.6.11

Vapor, steam and flash steam / Sludge drying, Slurry drying, Waste drying

11/06/2020
raw materials drying slurry drying 2020.6.10

Raw materials slurry drying / Liquid drying / Test cases / Slurry drying

10/06/2020
hybrid type dehydrator sludge dryer kenki dryer 2020.6.8

Hybrid type dehydrator / Sludge drying, Recycling drying

08/06/2020
midgut gland of the scallop drying recycling dryer kenki dryer 05/06/2020

Drying of Midgut gland of the scallop / Test cases / Waste drying, Recycling drying

06/06/2020

Category

  • About drying
  • Dehydrator, Dewatering
  • Exhibition
  • FAQ
  • KENKI DRYER
  • Patent
  • Raw materials drying
  • Sludge drying
  • Slurry drying
  • Steam
  • Waste drying
  • Wastewater treatment
  • Wood chips drying

Archive

  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • October 2019
  • June 2019
  • September 2018
  • August 2018
  • April 2018
  • January 2018
  • November 2017
  • October 2017
  • September 2017
  • August 2017
  • July 2017
  • June 2017
  • May 2017
  • Sitemap
footer logo 01 png

3-9-7 KAMIMUTA, HAKATA-KU, FUKUOKA-SHI, FUKUOKA 812-0006 JAPAN
TEL:+81-92-411-1203
FAX:+81-92-411-1259

Copyright © KENKI DRYER All Rights Reserved.

PAGE TOP
MENU
  • Home 
  • Solution 
    • Sludge drying
    • Waste drying
    • Slurry drying
    • Heat source, Steam
    • Dry test
    • Evolution
  • Products 
    • Self-cleaning screw
    • Methods
    • Products Specifications
    • Global patents
    • Dry all
    • Videos
    • Patent certificates
    • Applications
    • Brochures
  • Heat pump dryers
    • About heat pump
    • The construction of the heat pump
    • Adiabatic expansion and adiabatic compression
    • Significantly reduced of fuel cost and carbon dioxide emission
  • Wood chips dryers 
    • Characteristics
    • Agitating blades
    • Methods
    • Specifications
    • Videos
  • About us 
    • Access
    • Adoptions
    • Global
  • Contact 
  • Japanese 
  • Our sites 
    • Company’s site English
    • Pyrolyzer Biogreen Japanese
    • Company’s site Japanese