Drying of soy pulp / Example of drying test Material to be dry: Soy pulp Purpose of drying: Feed from waste products Moisture content: 70％W.B. before drying, 5％W.B. after drying Requirements for dryer: No clogging inside of the dryer since materials being dried are adhesive. 24-hour unattended operation. No change in components of the dried […]
About the condition of steam Condition of steam can be divided into wet steam and superheated steam briefly. When water is heated under a certain pressure, its temperature stops rising and the water starts boiling. The temperature at this point is called “saturation temperature” and the water at this point has been named as “saturated […]
What is heat source / steam of dryer? What is “steam” precisely? Normally in many factories, steam is generated by steam generators or by boilers and used for various purposes.Steam is one of gaseous substances. The gaseous substance is roughly divided into steam and gas. When the substance is distincted between steam and gas, the […]
Drying of vegetable scraps / Example of drying test Material to be dry: Vegetable scraps Purpose of drying: Fertilizer from waste products Moisture content: 65％W.B. before drying, 10％W.B. after drying Requirements for dryer: No clogging inside of the dryer since materials being dried are adhesive. 24-hour unattended operation. No change in components of the dried […]
About test results –About additional tests for organic sludge (the third trial)-2 1.The maximum amount of input per hour Our new product called TSB can handle 1.75 times more inputs than. Model Steam injection to the blades Heated area per unit areas Maximum amount of input kg/hour New product Type:TSB Available 1.5 times larger than […]
