KENKI DRYER which is designed and manufactured based on technologies certificated as International Patents can dry materials that no other can deal with, such as sticky, adhesive and viscous materials with high water contents, and also materials in liquid state easily, safely and surely. Since it has outstanding ability and simple structure at the same time, initial, running and maintenance costs are low and we normally ask customers to compare with other manufacturer’s products when we got inquiries.
KENKI DRYER, with 11 patents in 8 countries, is an indirect steam dryer, but it is a completely unique product, different in structure from other similar indirect steam dryers. The KENKI DEYER uses steam as a heat source, but its high drying heat efficiency means that less steam is used. The use of excess steam is not costly in terms of fuel costs, and the dryer does not emit carbon dioxide during drying, allowing for decarbonized drying. Alternatively, by installing an electric boiler, no greenhouse gases or CO2 emissions are generated during drying. The KENKI DRYER is a continuous dryer, not a batch dryer that stores and dries materials to be dried. Therefore, the KENKI DRYER is easy to manage and can operate unattended 24 hours a day.
KENKI DRYER dries uniformly, has no problems after installation, is easy to maintain and has low operating costs. The KENKI DRYER has been well received by companies that have installed it for its improved productivity, high performance and durability without the need for manual labor.
Machine cost can be retrieved in short term for sludge drying, and also for low-material slurry drying, we recommend replacing compartment tray dryer which cause laborious works in its manual operation. Since organic waste with high moisture content such as coffee grounds, used tea leaves, soy pulps, livestock excretions, vegetable scraps and food residues can be dried without change in their components because of low-temperature drying, they can be re-used and recycled as fuels, soil conditioner, etc., and can be sold with high price, and also can contribute to the environment.
Sludge drying, low material slurry drying and organic waste drying with high moisture contents can be done easily, safely, surely and with low-cost.
Patented in JAPAN,USA,FRANCE, GERMANY,UK,SWITZERLAND,CANADA ,TAIWAN / ８ Countries 11 Patents.
In low-temperature drying of sludge, low material slurry and organic waste, clogging inside of dryers often make troubles since the materials easily stick, adhere and be bonded especially when they have high moisture contents. However, KENKI DRYER has unique structures which are certificated as International Patents and any materials doesn’t clogged inside during the drying process even it is a low-temperature dryer that makes components of the material stay unchanged.
Also, it doesn’t need operators, it can make continuous operation possible for 24 hours, and it is outstanding in the safety and health point of view.
KENKI DRYER uses only saturated steam as heat source of the drying process, however, it has unique drying system that use not only the normal conductive heat transfer method of steam drying but also heated air method of heat exchange, therefore, the quality of dried material is uniform and stable.
Since KENKI DRYER consumes small amount of saturated steam as its heat source, there is no need to introduce additional boilers and also decarbonation and fuel cost reduction are possible by using left-over steam in factories.
Since KENKI DRYER has simple structure, it has small number of replacement parts, it is easy to maintenance, hardly break, and it can be used for long term.
Our company is driving forward globalization proactively and we have set up our sales office in EU, Southeast Asia, Taiwan and also we are currently establishing agency network in other area and countries.
Please don’t hesitate to ask about KENKI DRYER of a sticky and adhesive material dryer that no other company can deal with, a dryer with International Patented technology.
| ■ Low temperature drying / KENKI DRYER |
Waste water quality standard is established for waste water discharged from factory or manufacturing sites. In case of effluent into public waters (rivers, lakes, etc), it is regulated by Water Pollution Prevention Act, and the act has effluent standards which are “effluent standard about Harmful Substances” and “effluent standard about living conditions”. Also, effluent into […]
Operation process in manufacturing industry generally includes cleaning process. Detergent is one of the substances used in the cleaning process. Detergent always contains surfactant and surfactant helps the cleaning process a lot. Then, what is surfactant? Surface Materials can be classified into three types which are solids, liquids and gases. Boundary where these phases contact is […]
What is lotus effect? Wettability changes according to shape of surface as well. Lotus leaf is one of the examples. Water which dropped on surface of lotus leaf become droplets by shaping like a sphere and catches dirt while it rolls down, so that surface of lotus leaf never gets wet. Droplet on surface of […]
Degree of wetness can be expressed with contact angle. For example, when a droplet drops on a desk, it sometimes forms round grain shape and sometimes spreads widely and flatly. For another example, surface of a clean newly bought cup gets wet easily though, surface of cup which has been used many times does not. It is […]
KENKI DRYER is a drying apparatus and dries objects being wet. Being wet suggests a phenomenon that liquid is contacting surface of solid body, and degree of wetness can be measured from their contact angles if we know the surface tension of solid and liquid. Then, what is surface tension? Surface tension is energy comes from […]
You must be logged in to post a comment.