Test results for wood chips dryer of our new product / Wood chips dryer

Wood chips drying / An input , To three times by the same model

Test results for wood chip dryer of our new product / Wood chips dryer
We almost reached to our initial target values after performing the tests with various patterns.
Now wood chip dryer is brought to completion and it is named as TSW. Its details are the following.
Please see the details of wood chip dryer in this page.
Also by clicking diagram, you can jump to each page.

1.Three Major characteristics

Wood chip after being dried can be used safely.

Low-temperature drying
It prevents change in material component by drying with low temperature.The running cost is kept minimum by low-temperature drying.

Prevent crashing
Materials are dried without being crushed. There is no machine downtime caused by getting the stuffs caught in.

Continuous operation
It can achieve 24-hour unattended operation and no arrangement of operator is necessary.

2.Unique agitating blades

Agitate without crushing or getting caught in.

Less unexpected shape changes
Materials are dried without being crushed. There is no machine downtime caused by getting the stuffs caught in.

Heat reaches well to every part of the dried material
Unique shape of blade helps agitation of the dried material well enough, so that every part of the material is heated and dried.

Crush prevention
Unique agitating blade mechanism prevents shape change of materials to be dried. Also, there is no machine downtime caused by getting the material caught in.

3. Four methods of drying process

Patented in JAPAN, TAIWAN Patent applied in CHINA, KOREA, EU, US,CANADA

　Feeding and drying
This is a feeder equipment which feed materials to the main body by rotating two shafts having special shaped blades attached. Steam are supplied into the two shafts so that the shafts and the blades are continuously heated.

　Agitation drying
This is the main section of this dryer. Unique blades are attached to two shafts set inside of the main body of the dryer, and the blades dry, agitate and carry materials without crushing or getting caught in. Steam are supplied into the two shafts so that the shafts and the blades are continuously heated.

　Circulation drying
Air inside of the dryer is drawn in with a circulation blower and the air is blown back to the dryer after heated by heat exchangers attached on the upper part of the dryer.The air blown back is aimed at the top part of the material. To blow heated air always on the top part of the materials helps to dry the materials efficiently.

　Indirect drying
A heat exchanger is attached to outside of the dryer’s trough. Steam is supplied to the heat exchanger and the side and bottom parts of the dryer are heated up continuously.

4.Steam for steam turbine can be used as a heat source of a dryer.

This is a continuous operating type indirect dryer using low pressure steam.

Are you considering about using your wood chips for electricity generation by drying them?
Have you ever experienced problems in electricity generation because of too much moisture in the wood chip?