About the detailed contents of drying test. We perform drying test for 2 days or more with one kind to material to be dried after receiving it. Some conditions settings of normal test are chosen and tests are performed on that settings. The number of settings is two or more, and sometimes the tests are performed […]
Development procedure Currently, KENKI DRYER is under improvement and development. The development procedure is performed by the following processes. 1.Model machine designing, manufacturing and trial run -> 2. Test machine designing, manufacturing and trial run. Currently, model machine designing has been done and model machine is being manufactured. 1.Model machine Model machine are designed and manufactured, then […]
Drying of waste included metal / Example of drying test Material to be dry: Waste included metal Purpose of drying: Raw materials from waste products Moisture content: 75％W.B. before drying, 10％W.B. after drying Requirements for dryer: No clogging inside of the dryer since materials being dried are sticky. 24-hour unattended operation. No change in components of the […]
Comparison with competitive dryer / Comparison of dryers for sticky and adhesive materials / Organic sludge dryer, raw material dryer 1. Comparison with hot air dryer. 2. Comparison with indirect dryer using steam. KENKI DRYER videos / The drying of sticky ＆ adhesive raw materials Company’s site : https://kenki-corporation.com
Comparison between organic sludge and organic matter / About effects of flocculants during drying process -3 After water treatment and dewatering process, organic sludge containing flocculants becomes granular as it is dried. However, organic matter containing no flocculants never becomes granular after being dried. It seems the effect of flocculants during drying process can be seen only […]
You must be logged in to post a comment.