KENKI DRYER which is designed and manufactured based on technologies certificated as International Patents can dry materials that no other can deal with, such as sticky, adhesive and viscous materials with high water contents, and also materials in liquid state easily, safely and surely. Since it has outstanding ability and simple structure at the same time, initial, running and maintenance costs are low and we normally ask customers to compare with other manufacturer’s products when we got inquiries.
Machine cost can be retrieved in short term for sludge drying, and also for low-material slurry drying, we recommend replacing compartment tray dryer which cause laborious works in its manual operation. Since organic waste with high moisture content such as coffee grounds, used tea leaves, soy pulps, livestock excretions, vegetable scraps and food residues can be dried without change in their components because of low-temperature drying, they can be re-used and recycled as fuels, soil conditioner, etc., and can be sold with high price, and also can contribute to the environment.
Sludge drying, low material slurry drying and organic waste drying with high moisture contents can be done easily, safely, surely and with low-cost.
Patented in JAPAN,USA,FRANCE, GERMANY,UK,SWITZERLAND,CANADA ,TAIWAN / 8 Countries 11 Patents.
In low-temperature drying of sludge, low material slurry and organic waste, clogging inside of dryers often make troubles since the materials easily stick, adhere and be bonded especially when they have high moisture contents. However, KENKI DRYER has unique structures which are certificated as International Patents and any materials doesn’t clogged inside during the drying process even it is a low-temperature dryer that makes components of the material stay unchanged.
Also, it doesn’t need operators, it can make continuous operation possible for 24 hours, and it is outstanding in the safety and health point of view.
KENKI DRYER uses only saturated steam as heat source of the drying process, however, it has unique drying system that use not only the normal conductive heat transfer method of steam drying but also heated air method of heat exchange, therefore, the quality of dried material is uniform and stable.
Since KENKI DRYER consumes small amount of saturated steam as its heat source, there is no need to introduce additional boilers and also decarbonation and fuel cost reduction are possible by using left-over steam in factories.
Since KENKI DRYER has simple structure, it has small number of replacement parts, it is easy to maintenance, hardly break, and it can be used for long term.
Our company is driving forward globalization proactively and we have set up our sales office in EU, Taiwan, Russia and former Soviet Union, and also we are currently establishing agency network in other area and countries.
Please don’t hesitate to ask about KENKI DRYER of a sticky and adhesive material dryer that no other company can deal with, a dryer with International Patented technology.
■ Decarbonization / KENKI DRYER |
■ Low temperature drying / KENKI DRYER |
Drying of chemical plant slurry / Example of drying test Material to be dry: Chemical plant slurry Purpose of drying: Materials from waste products Moisture content: 92%W.B. before drying, 8%W.B. after drying Requirements for dryer: No clogging inside of the dryer since materials being dried are adhesive. 24-hour unattended operation. No change in components of the […]
Why steam is used? Latent heat of vaporization is used. Although steam is gas, it turns to liquid when it hits cold objects. During this liquefaction process, large amount of heat is produced. It is said that amount of the heat is two to five times larger than ones of warm water and oil. Heat […]
The continuation of previous content About moisture contents (1) / sludge drying, slurry drying, waste drying Also, moisture content is divided into “critical moisture content” and “equilibrium moisture content”.“critical moisture content” is the moisture content during a transition from constant rate period to falling rate period which are mentioned in the article “About drying process” […]
First, what is moisture contents? In short, it is a ratio of the quantity of water contained in a material.However, there are two ways of expression for the ratio that are “mass ratio” and “volume ratio”.The expression of “mass ratio” is usually used. The expression of “mass ratio” is usually used.In addition to that, there […]
Test has started with new product of KENKI DRYER. Soon after having completed urgent manufacturing and composition of the new KENKI DRYER, drying test with customer’s witness were taken place. This test has already been done by previous product of our dryer and we were asking the customer to wait until the new product to […]
You must be logged in to post a comment.