KENKI DRYER which is designed and manufactured based on technologies certificated as International Patents can dry materials that no other can deal with, such as sticky, adhesive and viscous materials with high water contents, and also materials in liquid state easily, safely and surely. Since it has outstanding ability and simple structure at the same time, initial, running and maintenance costs are low and we normally ask customers to compare with other manufacturer’s products when we got inquiries.
KENKI DRYER, with 11 patents in 8 countries, is an indirect steam dryer, but it is a completely unique product, different in structure from other similar indirect steam dryers. KENKI DEYER uses steam as a heat source, but its high drying heat efficiency means that less steam is used. The use of excess steam is not costly in terms of fuel costs, and the dryer does not emit carbon dioxide during drying, allowing for decarbonized drying. Alternatively, by installing an electric boiler, no greenhouse gases or CO2 emissions are generated during drying. KENKI DRYER is a continuous dryer, not a batch dryer that stores and dries materials to be dried. Therefore, KENKI DRYER is easy to manage and can operate unattended 24 hours a day.
KENKI DRYER dries uniformly, has no problems after installation, is easy to maintain and has low operating costs. The KENKI DRYER has been well received by companies that have installed it for its improved productivity, high performance and durability without the need for manual labor.
Machine cost can be retrieved in short term for sludge drying, and also for low-material slurry drying, we recommend replacing compartment tray dryer which cause laborious works in its manual operation. Since organic waste with high moisture content such as coffee grounds, used tea leaves, beverage lees and organic residues can be dried without change in their components because of low-temperature drying, they can be re-used and recycled as fuels, soil conditioner, etc., and can be sold with high price, and also can contribute to the environment.
Sludge drying, low material slurry drying, beverage lees and organic waste drying with high moisture contents can be done easily, safely, surely and with low-cost.
Patented in JAPAN,USA,FRANCE, GERMANY,UK,SWITZERLAND,CANADA ,TAIWAN / ８ Countries 11 Patents.
In low-temperature drying of sludge, low material slurry and organic waste, clogging inside of dryers often make troubles since the materials easily stick, adhere and be bonded especially when they have high moisture contents. However, KENKI DRYER has unique structures which are certificated as International Patents and any materials doesn’t clogged inside during the drying process even it is a low-temperature dryer that makes components of the material stay unchanged.
Also, it doesn’t need operators, it can make continuous operation possible for 24 hours, and it is outstanding in the safety and health point of view.
KENKI DRYER uses only saturated steam as heat source of the drying process, however, it has unique drying system that use not only the normal conductive heat transfer method of steam drying but also heated air method of heat exchange, therefore, the quality of dried material is uniform and stable.
Since KENKI DRYER consumes small amount of saturated steam as its heat source, there is no need to introduce additional boilers and also decarbonation and fuel cost reduction are possible by using left-over steam in factories.
Since KENKI DRYER has simple structure, it has small number of replacement parts, it is easy to maintenance, hardly break, and it can be used for long term.
Our company is driving forward globalization proactively and we have set up our sales office in EU, Southeast Asia, Taiwan and also we are currently establishing agency network in other area and countries.
Please don’t hesitate to ask about KENKI DRYER of a sticky and adhesive material dryer that no other company can deal with, a dryer with International Patented technology.
| ■ Low temperature drying / KENKI DRYER |
KENKI DRYER is a drying apparatus and dries objects being wet. Being wet suggests a phenomenon that liquid is contacting surface of solid body, and degree of wetness can be measured from their contact angles if we know the surface tension of solid and liquid. Then, what is surface tension? Surface tension is energy comes from […]
KENKI DRYER is a drying apparatus, and drying suggests the process to add heat to materials containing water, solvent, etc. and vaporize the liquid. It can be said that liquid in wet solid body becomes gas by getting energy. What is wetting then? Wetting is phenomenon that liquid is touching surface of solid body. Solid body will […]
Seasoning processing factory sludge drying / Test cases Material to be dry : Seasoning processing sludge Purpose of drying : Being use as fuel or fertilizer after drying Moisture content : 80％W.B. before drying, 10％W.B. after drying Requirements for dryer : Not to be clogged inside of the dryer since the material has adhesiveness. 24 […]
If you would like to check size of KENKI DRYER before doing drying test, model selection can be done by checking the amount of evaporated water from our standard specification. The amount of evaporated water suggests the difference between before and after the drying process, and it is possible to be calculated. The followings are its […]
Heat source of KENKI DRYER, which is a drying apparatus, is saturated steam. To convert the amount of steam consumed for its drying process into energy amount, “Conversion method of steam” issued by METI (Ministry of Economy, Trade and Industry) is a good reference. Specific enthalpy of steam is used for the calculation of amount of […]
You must be logged in to post a comment.